Shop | My Website

Product Range

CF200 - Plastic CF Flange Cap SKU: F200CAP CF Flange caps are used to protect the knife edge face on CF Flanges. Manufactured from: Plastic £ 2.95 2.95 GBP	CF200 Nut, Bolt and Washers SKU: F200NBWS CF Nut Bolt and Washers with Silver Plated Bolts are used to clamp two flanges together and compress them against the copper gasket creating a vacuum seal for applications involving baking. The silver plating allows for easy disassembly after baking. Manufactured from: Stainless Steel and Silver Plating. CF Nut Bolt and Washer (Silver Plated Bolts) sets are supplied in sealed plastic bags. CF Nuts, Bolts and Washers (Silver Plated Bolts) are manufactured to the ISO standard and are compatible with other supplier’s products. £ 25.51 25.51 GBP	CF200 Rotatable Blank CF Flange SKU: F200R CF Rotatable Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Rotatable Blank Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L stainless steel as standard, 316L and other materials can be supplied • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 232.50 232.5 GBP	CF200 Rotatable Bored CF Flange, 254mm OD 203mm ID SKU: F200RB CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 189.00 189.0 GBP
CF200 Bored Rotatable Tapped Flange, 204mm ID SKU: F200RBT CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 215.20 215.20000000000002 GBP	CF200 Blank Rotatable Tapped Flange SKU: F200RT CF Rotatable Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Rotatable Blank Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L stainless steel as standard, 316L and other materials can be supplied • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm	CF200 Blank Tapped Flange SKU: F200T CF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. The CF Blank flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 167.95 167.95000000000002 GBP	CF200 Nut, Bolt and Washers SKU: F200TBWS CF Nut Bolt and Washers with Silver Plated Bolts are used to clamp two flanges together and compress them against the copper gasket creating a vacuum seal for applications involving baking. The silver plating allows for easy disassembly after baking. Manufactured from: Stainless Steel and Silver Plating. CF Nut Bolt and Washer (Silver Plated Bolts) sets are supplied in sealed plastic bags. CF Nuts, Bolts and Washers (Silver Plated Bolts) are manufactured to the ISO standard and are compatible with other supplier’s products. £ 38.14 38.14 GBP
CF250 Fixed Blank Flange SKU: F250 CF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. The CF Blank flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 376.50 376.5 GBP	CF250 Fixed Bored Flange, 305mm OD 254mm ID SKU: F250B CF Bored Flanges Fixed are used for welding onto tube to produce ports and connectors when manufacturing fabrications. Manufactured from: 304L and 316L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Bored Flanges Fixed are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 379.50 379.5 GBP	CF250 - Bored Tapped Flange, 254mm ID SKU: F250BT CF Bored Flanges Fixed are used for welding onto tube to produce ports and connectors when manufacturing fabrications. Manufactured from: 304L and 316L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Bored Flanges Fixed are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm	CF250 - Plastic CF Flange Cap SKU: F250CAP CF Flange caps are used to protect the knife edge face on CF Flanges. Manufactured from: Plastic £ 3.70 3.7 GBP
CF250 Nut, Bolt and Washers SKU: F250NBWS CF Nut Bolt and Washers with Silver Plated Bolts are used to clamp two flanges together and compress them against the copper gasket creating a vacuum seal for applications involving baking. The silver plating allows for easy disassembly after baking. Manufactured from: Stainless Steel and Silver Plating. CF Nut Bolt and Washer (Silver Plated Bolts) sets are supplied in sealed plastic bags. CF Nuts, Bolts and Washers (Silver Plated Bolts) are manufactured to the ISO standard and are compatible with other supplier’s products. £ 38.06 38.06 GBP	CF250 Rotatable Blank CF Flange SKU: F250R CF Rotatable Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Rotatable Blank Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L stainless steel as standard, 316L and other materials can be supplied • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm	CF250 Rotatable Bored CF Flange, 305mm OD 256mm ID SKU: F250RB CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 375.50 375.5 GBP	CF250 Bored Rotatable Tapped Flange, 254mm ID SKU: F250RBT CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm
CF250 Blank Rotatable Tapped Flange SKU: F250RT CF Rotatable Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Rotatable Blank Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L stainless steel as standard, 316L and other materials can be supplied • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm	CF250 Blank Tapped Flange SKU: F250T CF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. The CF Blank flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm	CF250 Nut, Bolt and Washers SKU: F250TBWS CF Nut Bolt and Washers with Silver Plated Bolts are used to clamp two flanges together and compress them against the copper gasket creating a vacuum seal for applications involving baking. The silver plating allows for easy disassembly after baking. Manufactured from: Stainless Steel and Silver Plating. CF Nut Bolt and Washer (Silver Plated Bolts) sets are supplied in sealed plastic bags. CF Nuts, Bolts and Washers (Silver Plated Bolts) are manufactured to the ISO standard and are compatible with other supplier’s products. £ 30.86 30.86 GBP	CF35 Fixed Blank Flange SKU: F35 CF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. The CF Blank flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 16.14 16.14 GBP