ISO Tees are used to bring in a branch line of the same size into a main line.

Manufactured from: 304 stainless steel. Helium leak tested to 10-8 mbar. ISO Tees are supplied in a sealed plastic bag with protective plastic caps.

ISO Tees are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Claw Clamp Tubulations are used to weld into other fabricated parts to produce ports for instruments and feedthrough attachments.

Manufactured from: 304 Stainless Steel. ISO Claw Clamp Tubulations are supplied in a plastic bag with a protective plastic cap.

ISO Claw Clamp Tubulations are manufactured to the ISO Standard and are compatible with other supplier’s product.

Demountable viewport on a ISO80 flange with UV grade fused silica optic

Demountable viewport for high vacuum systems allowing users to change optics without having to replace the complete viewport, which saves money, and is very useful if optic damage is likely, for example, in laser applications.

• Constructed from stainless steel 304L (1.4307) with an aluminium alloy retainer.
• Can be installed on standard ISO vacuum ports, no special adaptors or fittings needed.
• UHV cleaned and helium leak tested.
• Typical lead time 4-6 weeks.
• Optic materials available: borosilicate glass, sapphire, zinc selenide (ZnSe), magnesium fluoride (MgF2), barium fluoride (BaF2) and calcium fluoride (CaF2). Other materials may be supplied on request.
* Different sizes available on request.

Demountable viewport on a ISO80 flange with borosilicate glass (Kodial) optic

Demountable viewport for high vacuum systems allowing users to change optics without having to replace the complete viewport, which saves money, and is very useful if optic damage is likely, for example, in laser applications.

• Constructed from stainless steel 304L (1.4307) with an aluminium alloy retainer.
• Can be installed on standard ISO vacuum ports, no special adaptors or fittings needed.
• UHV cleaned and helium leak tested.
• Typical lead time 4-6 weeks.
• Optic materials available: borosilicate glass, sapphire, zinc selenide (ZnSe), magnesium fluoride (MgF2), barium fluoride (BaF2) and calcium fluoride (CaF2). Other materials may be supplied on request.
* Different sizes available on request.

ISO 4 Way Crosses are used to bring in two branch lines of the same size into a main line.

Manufactured from: 304 stainless steel. Helium leak tested to 10-8 mbar. ISO 4 Way Cross are supplied in a sealed plastic bag with protective plastic caps.

ISO 4 Way Cross are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Reducing 4 way Crosses are used to bring two branch lines of a different size into a main line.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. ISO Reducing 4 way crosses are supplied in a sealed plastic bag with protective plastic caps.

ISO Reducing 4 way crosses are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO 6 Way Crosses are used to bring in four branch lines of the same size into a main line.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. ISO 6 Way Crosses are supplied in a sealed plastic bag with protective plastic caps.

ISO 6 Way Crosses are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISP pumps are perfectly suited for laboratories and clean room environments where low noise is also important.

Specification:

• Noise level: 67 (74 with air flushing)
• Pump Speed: 1000 L/min
• Final pressure (50Hz): 1
• Motor power (kW): 1.4
• Voltage Third Phase: 200, 208, 230, 380, 450, 460
• Weight Third Phase: 68kg
• Water vapor capacity (g/Tag): 25 (with air flushing)
• Air flushing (L/min): 40 L/min
• Inlet connection NW: 40
• Outlet connection NW: 40
• Cooling system: Air-cooled
• Ambient temperature (°C): 10~40

ISP pumps are perfectly suited for laboratories and clean room environments where low noise is also important.

Specification:

• Noise level: 67 (74 with air flushing)
• Pump Speed: 1000 L/min
• Final pressure (50Hz): 1
• Motor power (kW): 1.4
• Voltage Third Phase: 200, 208, 230, 380, 450, 460
• Weight Third Phase: 68kg
• Water vapor capacity (g/Tag): 25 (with air flushing)
• Air flushing (L/min): 40 L/min
• Inlet connection NW: 40
• Outlet connection NW: 40
• Cooling system: Air-cooled
• Ambient temperature (°C): 10~40

ISP pumps are perfectly suited for laboratories and clean room environments where low noise is also important.

Specification:

• Noise Level: 58 (66 with air flushing)
• Pump Speed: 250 L/min
• Final Pressure (50Hz): 1.6
• Motor Power (kW): 0.4
• Voltage Single Phase: 100, 115, 200, 230 (with temperature protection)
• Voltage Three Phase: 200, 208, 230, 380, 350, 460
• Weight Single Phase: 25
• Weight Third Phase: 23
• Water Vapor Capacity (g/Tag): 25 (with air flushing)
• Air Flushing (L/min): 10
• Inlet Connection NW: 25
• Outlet Connection NW: 16
• Cooling System: Air-cooled
• Ambient Temperature (°C): 5 ~ 40

ISP pumps are perfectly suited for laboratories and clean room environments where low noise is also important.

Specification:

• Noise level: 58 (66 with air flushing)
• Pump Speed: 250 L/min
• Final pressure (50Hz): 1.6
• Motor power (kW): 0.4
• Voltage Single Phase: 100, 115, 200, 230 (with temperature protection).
• Voltage Three Phase: 200, 208, 230, 380, 350, 460
• Weight Single Phase: 25
• Weight Third Phase: 23
• Water vapor capacity (g/Tag): 25 (with air flushing)
• Air flushing (L/min): 10
• Inlet connection NW: 25
• Outlet connection NW: 16
• Cooling system: Air-cooled
• Ambient temperature (°C): 5 ~ 40

ISP pumps are perfectly suited for laboratories and clean room environments where low noise is also important.

Specification:

• Noise Level (dB): 48
• Pump Speed (L/min): 50
• Final Pressure (50Hz): 20
• Motor Power (kW): 0.1
• Voltage: AC 100 V; AC 200 V; AC 230 V
• Weight (KG): 12
• Water Vapor Capacity (g/Tag): 3 (with air flushing)
• Air Flushing (L/min): 4
• Inlet Connection NW: 25
• Outlet Connection NW: 16
• Cooling System: Air-cooled
• Ambient Temperature (°C): 5~40

ISP pumps are perfectly suited for laboratories and clean room environments where low noise is also important.

Specification:

• Noise level: 60 (68 with air flushing)
• Pump Speed: 500 L/min
• Final pressure (50Hz): 1
• Motor power (kW): 0.6
• Voltage Single Phase: 100, 115, 200, 230 (with temperature protection)
• Voltage Third Phase: 200, 208, 230, 380, 450, 460
• Weight Single Phase: 44kg
• Weight Third Phase: 38kg
• Water vapor capacity (g/Tag): 25 (with air flushing)
• Air flushing (L/min): 10 L/min
• Inlet connection NW: 40
• Outlet connection NW: 25
• Cooling system: Air-cooled
• Ambient temperature (°C): 5~40

ISP pumps are perfectly suited for laboratories and clean room environments where low noise is also important.

Specification:

• Noise level: 60 (68 with air flushing)
• Pump Speed: 500 L/min
• Final pressure (50Hz): 1
• Motor power (kW): 0.6
• Voltage Single Phase: 100, 115, 200, 230 (with temperature protection)
• Voltage Third Phase: 200, 208, 230, 380, 450, 460
• Weight Single Phase: 44kg
• Weight Third Phase: 38kg
• Water vapor capacity (g/Tag): 25 (with air flushing)
• Air flushing (L/min): 10 L/min
• Inlet connection NW: 40
• Outlet connection NW: 25
• Cooling system: Air-cooled
• Ambient temperature (°C): 5~40

ISP pumps are perfectly suited for laboratories and clean room environments where low noise is also important.

Specification:

• Noise level: 60 (68 with air flushing)
• Pump Speed: 500 L/min
• Final pressure (50Hz): 1
• Motor power (kW): 0.6
• Voltage Single Phase: 100, 115, 200, 230 (with temperature protection)
• Voltage Third Phase: 200, 208, 230, 380, 450, 460
• Weight Single Phase: 44kg
• Weight Third Phase: 38kg
• Water vapor capacity (g/Tag): 25 (with air flushing)
• Air flushing (L/min): 10 L/min
• Inlet connection NW: 40
• Outlet connection NW: 25
• Cooling system: Air-cooled
• Ambient temperature (°C): 5~40

ISP pumps are perfectly suited for laboratories and clean room environments where low noise is also important.

Specification:

• Noise Level: 60 (68 with air flushing)
• Pump Speed: 500 L/min
• Final Pressure (50Hz): 1
• Motor Power (kW): 0.6
• Voltage Single Phase: 100, 115, 200, 230 (with temperature protection)
• Voltage Third Phase: 200, 208, 230, 380, 450, 460
• Weight Single Phase: 44kg
• Weight Third Phase: 38kg
• Water Vapor Capacity (g/Tag): 25 (with air flushing)
• Air Flushing (L/min): 10 L/min
• Inlet Connection NW: 40
• Outlet Connection NW: 25
• Cooling System: Air-cooled
• Ambient Temperature (°C): 5~40

ISP pumps are perfectly suited for laboratories and clean room environments where low noise is also important.

Specification:

• Noise Level: 52 db
• Pump Speed: 90
• Final Pressure (50Hz): 5
• Motor Power (kW): 0.15
• Voltage: 100, 115, 200, 230 (with temperature protection)
• Weight: 14
• Water Vapor Capacity (g/Tag): 5 (with air flushing)
• Air Flushing (L/min): 9
• Inlet Connection NW: 25
• Outlet Connection NW: 16
• Cooling System: Air-cooled
• Ambient Temperature (°C): 5~40

CF to KF Tubulated reducing adaptors are used to change from a CF flange to a KF mating flange enabling the fitting together of mismatched components.

Manufactured from: 304L Stainless Steel. Helium Leak tested to 10-10 mbar. They are supplied in a plastic bag with protective plastic caps.

The CF to KF Tubulated Adaptors are manufactured to the CF and KF Standards and are compatible with other supplier’s product.

• Material: 304L Stainless Steel
• Bakeable to 150°C
• Vacuum Rating 1×10-11 mbar
• Wide range of elbows, crosses, tees and adaptors are available

CF to KF Tubulated reducing adaptors are used to change from a CF flange to a KF mating flange enabling the fitting together of mismatched components.

Manufactured from: 304L Stainless Steel. Helium Leak tested to 10-10 mbar. They are supplied in a plastic bag with protective plastic caps.

The CF to KF Tubulated Adaptors are manufactured to the CF and KF Standards and are compatible with other supplier’s product.

• Material: 304L Stainless Steel
• Bakeable to 150°C
• Vacuum Rating 1×10-11 mbar
• Wide range of elbows, crosses, tees and adaptors are available

CF to KF Tubulated reducing adaptors are used to change from a CF flange to a KF mating flange enabling the fitting together of mismatched components.

Manufactured from: 304L Stainless Steel. Helium Leak tested to 10-10 mbar. They are supplied in a plastic bag with protective plastic caps.

The CF to KF Tubulated Adaptors are manufactured to the CF and KF Standards and are compatible with other supplier’s product.

• Material: 304L Stainless Steel
• Bakeable to 150°C
• Vacuum Rating 1×10-11 mbar
• Wide range of elbows, crosses, tees and adaptors are available