KF Aluminium Centering Rings with Viton O-rings are used to connect two flanges together and create a vacuum seal with the use of a clamp.

Manufactured from Aluminium and Viton. KF Aluminium Centering Rings are supplied in a sealed plastic bag.

KF Aluminium Centering Rings are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Flanges (Klien) are the standard DIN 28430 and ISO 2861 connections for vacuum fittings up to DN50 used in low and high vacuum. Along with the ancillary components, they offer a simple solution for applications requiring easy and repeated assembly.

Sealing is accomplished with a centering with a nitrile or Viton O-ring squashed between a pair of KF Flanges and pulled together using a circumferential clamp.

KF Blank Flanges points:
• Material: 304L Stainless Steel
• Bakeable to 150° C
• Vacuum Rating: 1×10-8 mbar
• Wide range of elbows, crosses and tees are available
• Tubulated Flanges are available for welding to stainless steel tube

KF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.

Manufactured from: 304 Stainless Steel. KF Blank flanges are supplied in a sealed plastic bag with a protective plastic cap.

KF Blank flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Stainless Steel Centering Rings with Viton O-rings are used to connect two flanges together and create a vacuum seal with the use of a clamp.

Manufactured from 304 Stainless Steel and Viton. KF Stainless Steel Centering Rings are supplied in a sealed plastic bag.

KF Stainless Steel Centering Rings are manufactured to the ISO standard and are compatible with other supplier’s products.

KF Aluminium Centering Rings with Viton O-rings are used to connect two flanges together and create a vacuum seal with the use of a clamp.

Manufactured from Aluminium and Viton. KF Aluminium Centering Rings are supplied in a sealed plastic bag.

KF Aluminium Centering Rings are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Flanges (Klien) are the standard DIN 28430 and ISO 2861 connections for vacuum fittings up to DN50 used in low and high vacuum. Along with the ancillary components, they offer a simple solution for applications requiring easy and repeated assembly.

Sealing is accomplished with a centering with a nitrile or Viton O-ring squashed between a pair of KF Flanges and pulled together using a circumferential clamp.

KF Bored Flanges points:

• Material: 304L Stainless Steel
• Bakeable to 150°C
• Vacuum Rating: 1×10-8 mbar
• Wide range of elbows, crosses and tees are available
• Tubulated Flanges are available for welding to stainless steel tube

KF Bored flanges are used for welding onto tube to produce ports and connectors when manufacturing fabrications.

Manufactured from: 304 Stainless Steel. KF Bored flanges are supplied in a sealed plastic bag with a protective plastic cap.

KF Bored flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Flanges (Klien) are the standard DIN 28430 and ISO 2861 connections for vacuum fittings up to DN50 used in low and high vacuum. Along with the ancillary components, they offer a simple solution for applications requiring easy and repeated assembly.

Sealing is accomplished with a centering with a nitrile or viton O-ring squashed between a pair of KF Flanges and pulled together using a circumferential clamp.

KF Blank Flanges points:
• Material: 304L Stainless Steel
• Bakeable to 150° C
• Vacuum Rating: 1×10-8 mbar
• Wide range of elbows, crosses and tees are available
• Tubulated flanges are available for welding to stainless steel tube

KF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.

Manufactured from: 304 Stainless Steel. KF Blank flanges are supplied in a sealed plastic bag with a protective plastic cap.

KF Blank flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Clamps Aluminium are used to clamp two flanges to a centering ring and an O-ring, creating a vacuum seal.

KF Clamps Aluminium are manufactured from aluminium and are supplied in a sealed plastic bag.

KF Clamps Aluminium are manufactured to the ISO standard and are compatible with other supplier’s products.

KF Tubulated Reducing Adaptors are used to change the size of a tube or flange from one size to another. This enables mismatched components to be fitted together.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Tubulated Reducing Adaptors are supplied in a sealed plastic bag with protective plastic caps.

KF Tubulated Reducing Adaptors are manufactured to the ISO Standard. They are compatible with other suppliers’ products.

KF Stainless Steel Centering Rings with Viton O-rings are used to connect two flanges together and create a vacuum seal with the use of a clamp.

Manufactured from: 304 Stainless Steel and Viton. KF Stainless Steel Centering Rings are supplied in a sealed plastic bag.

KF Stainless Steel Centering Rings are manufactured to the ISO standard and are compatible with other supplier’s products.

KF Stainless Steel Reducing Centering Rings are used to connect two flanges of different internal sizes. This creates a vacuum seal with the use of a clamp.

Manufactured from 304 stainless steel and Viton. KF Stainless Steel Reducing Centering Rings are supplied in a sealed plastic bag.

KF Stainless Steel Reducing Centering Rings are manufactured to the ISO standard and are compatible with other supplier’s products.

KF16 Trapped Centering Ring with Viton O-Ring

KF Trapped Centering Rings with Viton O-rings are used to connect two flanges together and create a vacuum seal with the use of a clamp; they also provide for cases of slight over pressure.

Manufactured from: 304 stainless steel, Aluminium and Viton.

KF Trapped Centering Rings are supplied in a sealed plastic bag.

KF Trapped Centering Rings are manufactured to the ISO standard and are compatible with other supplier’s products.

KF20/25 Stainless Steel Reducing Centering Ring with Viton O-Ring

KF Stainless Steel Reducing Centering Rings are used to connect two flanges of different internal sizes. This creates a vacuum seal with the use of a clamp.

Manufactured from 304 Stainless Steel and Viton. KF Stainless Steel Reducing Centering Rings are supplied in a sealed plastic bag.

KF Stainless Steel Reducing Centering Rings are manufactured to the ISO standard and are compatible with other supplier’s products.

KF Aluminium Centering Rings with Viton O-rings are used to connect two flanges together and create a vacuum seal with the use of a clamp.

Manufactured from Aluminium and Viton. KF Aluminium Centering Rings are supplied in a sealed plastic bag.

KF Aluminium Centering Rings are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Flanges (Klien) are the standard DIN 28430 and ISO 2861 connections for vacuum fittings up to DN50 used in low and high vacuum. Along with the ancillary components, they offer a simple solution for applications requiring easy and repeated assembly.

Sealing is accomplished with a centering with a nitrile or viton o’ring squashed between a pair of KF Flanges and pulled together using a circumferential clamp.

KF Bored Flanges points:
• Material: 304L stainless steel
• Bakeable to 150° C
• Vacuum Rating: 1×10-8 mbar
• Wide range of elbows, crosses and tees are available
• Tubulated Flanges are available for welding to stainless steel tube

KF Bored flanges are used for welding onto tube to produce ports and connectors when manufacturing fabrications.

Manufactured from: 304 Stainless Steel. KF Bored flanges are supplied in a sealed plastic bag with a protective plastic cap.

KF Bored flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Flanges (Klien) are the standard DIN 28430 and ISO 2861 connections for vacuum fittings up to DN50 used in low and high vacuum. Along with the ancillary components, they offer a simple solution for applications requiring easy and repeated assembly.

Sealing is accomplished with a centering with a nitrile or viton o-ring squashed between a pair of KF Flanges and pulled together using a circumferential clamp.

KF Blank Flanges points:

• Material: 304L Stainless Steel
• Bakeable to 150° C
• Vacuum Rating: 1×10-8 mbar
• Wide range of elbows, crosses and tees are available
• Tubulated Flanges are available for welding to stainless steel tube

KF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.

Manufactured from: 304 Stainless Steel. KF Blank flanges are supplied in a sealed plastic bag with a protective plastic cap.

KF Blank flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Clamps Aluminium are used to clamp two flanges to a centering ring and an O ring creating a vacuum seal.

KF Clamps Aluminium are manufactured from aluminium and are supplied in a sealed plastic bag.

KF Clamps Aluminium are manufactured to the ISO standard and are compatible with other supplier’s products.

KF Tubulated Reducing Adaptors are used to change the size of a tube or flange from one size to another. This enables mismatched components to be fitted together.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Tubulated Reducing Adaptors are supplied in a sealed plastic bag with protective plastic caps.

KF Tubulated Reducing Adaptors are manufactured to the ISO Standard. They are compatible with other suppliers’ products.

KF Tubulated Reducing Adaptors are used to change the size of a tube or flange from one size to another. This enables mismatched components to be fitted together.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Tubulated Reducing Adaptors are supplied in a sealed plastic bag with protective plastic caps.

KF Tubulated Reducing Adaptors are manufactured to the ISO Standard. They are compatible with other suppliers’ products.

KF Stainless Steel Centering Rings with Viton O-rings are used to connect two flanges together and create a vacuum seal with the use of a clamp.

Manufactured from 304 stainless steel and Viton. KF Stainless Steel Centering Rings are supplied in a sealed plastic bag.

KF Stainless Steel Centering Rings are manufactured to the ISO standard and are compatible with other supplier’s products.

KF Stainless Steel Reducing Centering Rings are used to connect two flanges of different internal sizes. This creates a vacuum seal with the use of a clamp.

Manufactured from 304 Stainless Steel and Viton. KF Stainless Steel Reducing Centering Rings are supplied in a sealed plastic bag.

KF Stainless Steel Reducing Centering Rings are manufactured to the ISO standard and are compatible with other supplier’s products.