Demountable viewport on a ISO63 flange with borosilicate glass (Kodial) optic

Demountable viewport for high vacuum systems allowing users to change optics without having to replace the complete viewport, which saves money, and is very useful if optic damage is likely, for example, in laser applications

Constructed from stainless steel 304L (1.4307) with an aluminium alloy retainer
Can be installed on standard ISO vacuum ports, no special adaptors or fittings needed
UHV cleaned and helium leak tested
Typical lead time 4-6 weeks
Optic materials available: borosilicate glass, sapphire, zinc selenide (ZnSe), magnesium fluoride (MgF2), barium fluoride (BaF2) and calcium fluoride (CaF2). Other materials may be supplied on request.

Different sizes available on request.

ISO 4 Way Crosses are used to bring in two branch lines of the same size into a main line.Manufactured from: 304 stainless steel. Helium Leak tested to 10-8 mbar. ISO 4 Way Cross are supplied in a sealed plastic bag with protective plastic caps.ISO 4 Way Cross are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO to KF Reducing Crosses are used to join two different Branch lines of  various sizes into a single main line.Manufactured from: 304 stainless steel. Helium Leak tested to 10-8 mbar. ISO to KF Reducing Crosses are supplied in a sealed plastic bag and protected with plastic caps.ISO to KF Reducing Crossesare compatible with other supplier’s products and are manufactured to the ISO Standard.

ISO to KF Reducing Crosses are used to join two different Branch lines of  various sizes into a single main line.Manufactured from: 304 stainless steel. Helium Leak tested to 10-8 mbar. ISO to KF Reducing Crosses are supplied in a sealed plastic bag and protected with plastic caps.ISO to KF Reducing Crossesare compatible with other supplier’s products and are manufactured to the ISO Standard.

ISO to KF Reducing Crosses are used to join two different Branch lines of  various sizes into a single main line.Manufactured from: 304 stainless steel. Helium Leak tested to 10-8 mbar. ISO to KF Reducing Crosses are supplied in a sealed plastic bag and protected with plastic caps.ISO to KF Reducing Crossesare compatible with other supplier’s products and are manufactured to the ISO Standard.

ISO to KF Reducing Crosses are used to join two different Branch lines of  various sizes into a single main line.Manufactured from: 304 stainless steel. Helium Leak tested to 10-8 mbar. ISO to KF Reducing Crosses are supplied in a sealed plastic bag and protected with plastic caps.ISO to KF Reducing Crossesare compatible with other supplier’s products and are manufactured to the ISO Standard.

ISO 6 Way Crosses are used to bring in four branch lines of the same size into a main line.Manufactured from: 304 stainless steel. Helium Leak tested to 10-8 mbar. ISO 6 Way Crosses are supplied in a sealed plastic bag with protective plastic caps.ISO 6 Way Crosses are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Aluminium Centering Rings with Nitrile O Rings are used to connect two flanges together and create a vacuum seal with the use of a clamp.Manufactured from: Aluminium and Nitrile. ISO Aluminium Centering Rings with Nitrile O rings are supplied in sealed plastic bags.ISO Aluminium Centering Rings with Nitrile O Rings are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Aluminium Trapped Centering Rings with Nitrile O Rings & Outer Traps are used to connect two flanges together and create a vacuum seal with the use of a clamp.Manufactured from: Aluminium and Nitrile. ISO Aluminium Trapped Centering Rings with Nitrile O Rings are supplied in sealed plastic bags.ISO Aluminium Trapped Centering Rings with Nitrile O Rings are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Aluminium Centering Rings with Viton O Rings are used to connect two flanges together and create a vacuum seal with the use of a clamp.Manufactured from: Aluminium and Viton. ISO Aluminium Centering Rings with Viton O Rings are supplied in sealed plastic bags.ISO Aluminium Centering Rings with Viton O Rings are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Trapped Centering Rings with Viton O Rings and Outer Traps are used to connect two flanges together and create a vacuum seal with the use of a clamp.Manufactured from: Aluminium and Viton. ISO Aluminium Trapped Centering Rings with Viton O Rings are supplied in sealed plastic bags.ISO Aluminium Trapped Centering Rings with Viton O Rings are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Claw Clamp Bored Flanges are used for welding onto tube to produce ports and connectors when manufacturing fabrications.Manufactured from: 304 Stainless Steel. ISO Claw Clamp Bored Flanges are supplied in a plastic bag with a protective plastic cap.ISO Claw Clamp Bored Flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Claw Clamp Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.Manufactured from: 304 Stainless Steel. ISO Claw Clamp Blank Flanges are supplied in a plastic bag with a protective plastic cap.ISO Claw Clamp Blank Flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO 90 Degree Elbows were manufactured for in vacuum process systems to help alter the direction of pipework.This product is made from 304 stainless steel. The ISO 90 Degree Elbow is also helium leak tested up to 10-8 mbar. The product is packed in a plastic bag and sealed by protective plastic caps.This product is compatible with alternative supplier’s products and is manufactured to the ISO standards.

ISO 45 Degree Bend Elbows are used to change the direction of the pipework as required.

Manufactured from: 304 stainless steel. Helium Leak tested to 10-8 mbar. ISO 45 Degree Bend Elbows are supplied in a sealed plastic bag with protective plastic caps.

ISO 45 Degree Bend Elbows are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Fixed Bolted Bored Flanges are used for welding onto tube to produce ports and connectors when manufacturing fabrications.Manufactured from: 304 Stainless Steel. ISO Fixed Bolted Bored Flanges are supplied in a plastic bag.ISO Fixed Bolted Bored Flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Fixed Bolted Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.Manufactured from: 304 Stainless Steel. ISO Fixed Bolted Blank Flanges are supplied in a plastic bag.ISO Fixed Bolted Blank Flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Flexible Vacuum Hoses are used to connect parts together when a solid straight connector is impractical or where the two parts move independently and flexibility is required.Manufactured from: 304 Stainless Steel. Helium Leak tested to 10-8 mbar. ISO Flexible Vacuum Hoses are supplied in a plastic bag with protective plastic caps.ISO Flexible Vacuum Hoses are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Flexible Vacuum Hoses are used to connect parts together when a solid straight connector is impractical or where the two parts move independently and flexibility is required.Manufactured from: 304 Stainless Steel. Helium Leak tested to 10-8 mbar. ISO Flexible Vacuum Hoses are supplied in a plastic bag with protective plastic caps.ISO Flexible Vacuum Hoses are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO Flexible Vacuum Hoses are used to connect parts together when a solid straight connector is impractical or where the two parts move independently and flexibility is required.Manufactured from: 304 Stainless Steel. Helium Leak tested to 10-8 mbar. ISO Flexible Vacuum Hoses are supplied in a plastic bag with protective plastic caps.ISO Flexible Vacuum Hoses are manufactured to the ISO Standard and are compatible with other supplier’s product.