Shop | My Website

Product Range

CF Fittings

CF Vacuum Fittings on this site comply with the ISO 3669 standard and CF Vacuum Fittings up to NW200 are compatible with ConFlat flanges and CF flanges from other leading manufacturers.

While there is no general standard for CF flanges NW250 and over, essentially two “standards” have come into use, one Anglo-American and one European, both of which are available in our product line. Other standards are also used by some other manufacturers and in use at some research centres.

Due to UHV bakeability requirements, sealing of the CF flanges is provided by use of Oxygen-free copper (OFHC) flat gasket rings which usually can only be used once due to deformation. The tightening pressure is exerted by through-bore screws that have to be tightened uniformly and crosswise to avoid excessive strain.

Material: 304L stainless steel as standard, 316L and other materials can be supplied upon request
Bakeable to 450°C
Vacuum rating 1×10-11mbar
Wide ranges of elbows, crosses, tees and adaptors are available
Tubulated flanges are available for welding to stainless steel tube

CF100 Nut, Bolt and Washers SKU: F100NBWS CF Nut Bolt & Washers with Silver Plated Bolts are used to Clamp two flanges together and compress them against the copper gasket creating a vacuum seal for applications involving Baking. The Silver Plating allows for easy disassembly after BakingManufactured from: Stainless Steel. And Silver Plating CF Nut Bolt & Washer (Silver Plated Bolts) sets are supplied in sealed plastic bags.CF Nuts, Bolts & Washers (Silver Plated Bolts) are manufactured to the ISO standard and are compatible with other supplier’s products £ 29.30 29.3 GBP	CF100 Rotatable Blank CF Flange SKU: F100R CF Rotatable Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Rotatable Blank Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. Material: 304L stainless steel as standard, 316L and other materials can be supplied Bakeable to 450°C Vacuum rating 1×10-11 mbar Wide range of elbows, crosses, tees and adaptors are available Tubulated flanges are available for welding to stainless steel tube   * European standard, to be used with copper gasket OD 272.7 mm £ 67.84 67.84 GBP	CF100 Rotatable Bored CF Flange, 152mm OD 102mm ID SKU: F100RB CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments.Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap.Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s productMaterial: 304L Stainless SteelBakeable to 450°CVacuum rating 1×10-11 mbarWide range of elbows, crosses, tees and adaptors are availableTubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 105.50 105.5 GBP	CF100 Rotatable Bored CF Flange, 152mm OD 108mm ID SKU: F100RB108 CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s product Material: 304L Stainless Steel Bakeable to 450°C Vacuum rating 1×10-11 mbar Wide range of elbows, crosses, tees and adaptors are available Tubulated flanges are available for welding to stainless steel tube   * European standard, to be used with copper gasket OD 272.7 mm £ 105.50 105.5 GBP
CF100 Bored Rotatable Tapped Flange, 108mm ID SKU: F100RB108T CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s product Material: 304L Stainless Steel Bakeable to 450°C Vacuum rating 1×10-11 mbar Wide range of elbows, crosses, tees and adaptors are available Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 95.20 95.2 GBP	CF100 Bored Rotatable Tapped Flange, 102mm ID SKU: F100RBT CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments.Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap.Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s productMaterial: 304L Stainless SteelBakeable to 450°CVacuum rating 1×10-11 mbarWide range of elbows, crosses, tees and adaptors are availableTubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 95.20 95.2 GBP	CF100 Blank Rotatable Tapped Flange SKU: F100RT CF Rotatable Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap.CF Rotatable Blank Flanges are manufactured to the CF Standard and are compatible with other supplier’s product.Material: 304L stainless steel as standard, 316L and other materials can be suppliedBakeable to 450°CVacuum rating 1×10-11 mbarWide range of elbows, crosses, tees and adaptors are availableTubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm	CF100 Blank Tapped Flange SKU: F100T CF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap.The CF Blank flanges are manufactured to the CF Standard and are compatible with other supplier’s product.Material: Stainless SteelBakeable to 450°CVacuum rating 1×10-11 mbarWide range of elbows, crosses, tees and adaptors are availableTubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 77.50 77.5 GBP
CF100 Nut, Bolt and Washers for Joining a Through Hole to a Tapped Flange SKU: F100TBWS CF Nut Bolt & Washers with Silver Plated Bolts are used to Clamp two flanges together and compress them against the copper gasket creating a vacuum seal for applications involving Baking. The Silver Plating allows for easy disassembly after Baking Manufactured from: Stainless Steel. And Silver Plating CF Nut Bolt & Washer (Silver Plated Bolts) sets are supplied in sealed plastic bags. CF Nuts, Bolts & Washers (Silver Plated Bolts) are manufactured to the ISO standard and are compatible with other supplier’s products.	CF150 Fixed Blank Flange SKU: F150 CF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. The CF Blank flanges are manufactured to the CF Standard and are compatible with other supplier’s product. Material: Stainless Steel Bakeable to 450°C Vacuum rating 1×10-11 mbar Wide range of elbows, crosses, tees and adaptors are available Tubulated flanges are available for welding to stainless steel tube   * European standard, to be used with copper gasket OD 272.7 mm £ 83.97 83.97 GBP	CF150 Fixed Bored Flange, 203mm OD 152.5mm ID SKU: F150B CF Bored Flanges Fixed are used for welding onto tube to produce ports and connectors when manufacturing fabrications. Manufactured from: 304L and 316L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Bored Flanges Fixed are manufactured to the CF Standard and are compatible with other supplier’s product.Material: 304L Stainless SteelBakeable to 450°CVacuum rating 1×10-11 mbarWide range of elbows, crosses, tees and adaptors are availableTubulated flanges are available for welding to stainless steel tube* European standard, to be used with copper gasket OD 272.7 mm £ 73.90 73.9 GBP	CF150 - Bored Tapped Flange, 152mm ID SKU: F150BT CF Bored Flanges Fixed are used for welding onto tube to produce ports and connectors when manufacturing fabrications. Manufactured from: 304L and 316L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Bored Flanges Fixed are manufactured to the CF Standard and are compatible with other supplier’s product. Material: 304L Stainless Steel Bakeable to 450°C Vacuum rating 1×10-11 mbar Wide range of elbows, crosses, tees and adaptors are available Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 103.99 103.99000000000001 GBP
CF150 Nut, Bolt and Washers SKU: F150NBWS CF Nut Bolt & Washers with Silver Plated Bolts are used to Clamp two flanges together and compress them against the copper gasket creating a vacuum seal for applications involving Baking. The Silver Plating allows for easy disassembly after BakingManufactured from: Stainless Steel. And Silver Plating CF Nut Bolt & Washer (Silver Plated Bolts) sets are supplied in sealed plastic bags.CF Nuts, Bolts & Washers (Silver Plated Bolts) are manufactured to the ISO standard and are compatible with other supplier’s products £ 23.31 23.31 GBP	CF150 Rotatable Blank CF Flange SKU: F150R CF Rotatable Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap.CF Rotatable Blank Flanges are manufactured to the CF Standard and are compatible with other supplier’s product.Material: 304L stainless steel as standard, 316L and other materials can be suppliedBakeable to 450°CVacuum rating 1×10-11 mbarWide range of elbows, crosses, tees and adaptors are availableTubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 109.95 109.95 GBP	CF150 Rotatable Bored CF Flange, 203mm OD 152.5mm ID SKU: F150RB CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s product Material: 304L Stainless Steel Bakeable to 450°C Vacuum rating 1×10-11 mbar Wide range of elbows, crosses, tees and adaptors are available Tubulated flanges are available for welding to stainless steel tube   * European standard, to be used with copper gasket OD 272.7 mm £ 119.95 119.95 GBP	CF150 Bored Rotatable Tapped Flange, 152mm ID SKU: F150RBT CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s product Material: 304L Stainless Steel Bakeable to 450°C Vacuum rating 1×10-11 mbar Wide range of elbows, crosses, tees and adaptors are available Tubulated flanges are available for welding to stainless steel tube   * European standard, to be used with copper gasket OD 272.7 mm £ 170.99 170.99 GBP
CF150 Blank Rotatable Tapped Flange SKU: F150RT CF Rotatable Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap.CF Rotatable Blank Flanges are manufactured to the CF Standard and are compatible with other supplier’s product.Material: 304L stainless steel as standard, 316L and other materials can be suppliedBakeable to 450°CVacuum rating 1×10-11 mbarWide range of elbows, crosses, tees and adaptors are availableTubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm	CF150 Blank Tapped Flange SKU: F150T CF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap.The CF Blank flanges are manufactured to the CF Standard and are compatible with other supplier’s product.Material: Stainless SteelBakeable to 450°CVacuum rating 1×10-11 mbarWide range of elbows, crosses, tees and adaptors are availableTubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm £ 115.95 115.95 GBP	CF150 Nut, Bolt and Washers SKU: F150TBWS CF Nut Bolt & Washers with Silver Plated Bolts are used to Clamp two flanges together and compress them against the copper gasket creating a vacuum seal for applications involving Baking. The Silver Plating allows for easy disassembly after BakingManufactured from: Stainless Steel. And Silver Plating CF Nut Bolt & Washer (Silver Plated Bolts) sets are supplied in sealed plastic bags.CF Nuts, Bolts & Washers (Silver Plated Bolts) are manufactured to the ISO standard and are compatible with other supplier’s products £ 12.17 12.17 GBP	CF16 Fixed Blank Flange SKU: F16 CF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. The CF Blank flanges are manufactured to the CF Standard and are compatible with other supplier’s product. Material: Stainless Steel Bakeable to 450°C Vacuum rating 1×10-11 mbar Wide range of elbows, crosses, tees and adaptors are available Tubulated flanges are available for welding to stainless steel tube   * European standard, to be used with copper gasket OD 272.7 mm £ 9.50 9.5 GBP